Subj : Sio2K.sys
To   : Bob Juge
From : Peter Santiago
Date : Sun Jul 01 2001 01:41 am

Bob Juge wrote in a message to Peter Santiago:

PS> Anybody here using sio2k.sys? Having a bit of a problem.  With
PS> sio.sys (version 1), Binkley can answer the modem, however with
PS> sio2k.sys.  Both Binkley and Maximus WFC refuses to answer calls.
PS> Furthermore, the usual RING modem result code doesn't appear.  And
PS> it's taking quite a while to initialize the port.

BJ> Please provide your SIO2K lines from CONFIG.SYS.

PS> Another question is if I'm going to let people telnet into my BBS
PS> via VMODEM and I would want to provide ten virtual modem ports for
PS> them to connect over the Internet, does that mean I have no choice
PS> but to buy a 16 port version of the SIO.sys package?

BJ> I'm pretty sure that Ray will sell you a 10 port or 12 port version
BJ> of SIO 1.60d (remember real hardware ports _and_ Vmodem ports count
BJ> toward the total).  Telnet to gwinn.com and see for sure.  However,
BJ> SIO2K supports up to 255 ports, and is currently in beta and free.

BJ>                                    - Bob
BJ> Internet  : [email protected]
BJ> Telnet, Vmodem, WWW or FTP to juge.com

Bob,
These are the lines that invoke sio2k.sys in my config.sys:

DEVICE=C:\SIO2K\UART.SYS LOGFILE=C:\SIO2K\SIO2K.LOG
DEVICE=C:\SIO2K\VSIO2K.SYS LOGFILE=C:\SIO2K\VSIO2K.LOG
DEVICE=C:\SIO2K\SIO2K.SYS LOGFILE=C:\SIO2K\SIO2K.LOG
Attached to com2 is an external modem while com3 is an internal PnP ISA modem
with IRQ 10 set by the PnP BIOS. (COM2 and COM3 initializes w/o any problems
with sio160d package...)

I have tried running logger.exe (included with the sio2k package) as advised in
the faq, then running modes com2:115200,n,8,1.  :(  Still won't work properly.

How I would wish to be able to buy a 10/12 port version of sio.sys...  But it's
going to be too bloddy expensive for me... <sigh> (In fact, I have been mulling
over migrating to Linux... too bad Maximus software is not yet ported to
Linux.) BTW, I have been visiting your site at www.juge.com.  A very handy site
it is. =)  Thanks.

Regards,
Peter
--- timEd/2 1.10.y2k+
* Origin:       PSInergy BBS * Ermita, Manila * Philippines       (6:750/101)