Subj : Re: Jiffydos 6.01 Question on C128-DCR

Subj : Re: Jiffydos 6.01 Question on C128-DCR
To : David Hoelzer
From : Jim Brain
Date : Sun Jun 20 2021 07:12 pm

On 6/16/2021 9:01 AM, David Hoelzer wrote:
> Hiya!
>
> I just purchased a ROM image set from RetroInnovations (I have emailed them and am still waiting for a response) for the 128-DCR. The problem I have is that they come with absolutely no documentation.
I have to disagree with that statement. Every ZIP file, including the
C128DCR file comes with a file called: ROM Creation README.txt. In it,
it says:

ROM creation requires a EPROM/FLASH/EEPROM programmer and suitable stock:
(EPROM, EEPROM, FLASH). It is beyond the scope of this document to explain
programming steps. Consult your user manual for programming information.

The non-JiffyDOS CBM files can be found at
ftp://www.zimmers.net/pub/cbm/firmware/drives/new/

The non-JiffyDOS non-CBM files are typically available at Zimmers as well,
but can also be read from your existing drive ROM(s)

Jim Brain
RETRO Innovations
--------------------------------------------------------------------------

Switched C128/C128DCR KERNAL ROM (32kB)
basic.901226-01.bin
kernal.901227-03.bin
kernal.318020-05.bin
basic.901226-01.bin
JiffyDOS_C64_6.01.bin
JiffyDOS_C128DCR_6.01.bin

I will admit the size is wrong (a switched unit requires 64kB EPROMs,
but everything else is there.

Jim
--
Jim Brain, [email protected]
RETRO Innovations: Contemporary Gear for Classic Systems
www.go4retro.com
--- SoupGate-Win32 v1.05
* Origin: Agency HUB, Dunedin - New Zealand | Fido<>Usenet Gateway (3:770/3)