NAME
E100PKT 0.3, packet driver for DOS
SYNOPSIS
E100PKT <option>
DESCRIPTION
E100PKT is a basic packet driver for Intel's 8255x family of
Ethernet adapters. It should work with any PCI device that
Linux's e100 kernel module (in e100.c) does.
Options are case-insensitive and must begin with either a / or -.
All the program's input and output is in hex without a leading
"0x" (e.g. "60" is 96 decimal).
SYSTEM REQUIREMENTS
* An IBM PC or compatible
* An Intel 80386 or compatible processor
* DOS 2 or higher
* 2560 bytes of free conventional memory
* An Intel E100 Ethernet adapter. That is, a PCI device whose
vendor id is 8086 and device id is one of the following:
1029 103c 1057 1091 27dc
1030 103d 1059 1092
1031 103e 1064 1093
1032 1050 1065 1094
1033 1051 1066 1095
1034 1052 1067 1209
1038 1053 1068 1229
1039 1054 1069 2449
103a 1055 106a 2459
103b 1056 106b 245d
OPTIONS
/h
/?
Show usage.
/v
Show version.
/u
Unload the packet driver from memory.
/i <int_no>
Load the packet driver into memory at the specified software
interrupt. Valid interrupt numbers are: 60-66, 68-6f, or
7b-7e (inclusive).
/d
Dump PCI configuration space to E100.PCI
Dump EEPROM to E100.EEP
Dump CSR to E100.CSR
BUGS
* E100PKT cannot be loaded high.
* E100PKT uses too much memory.
* E100PKT cannot be unloaded if its hardware interrupt vector
has been hooked since loading it.
* Please send any feedback and bug reports to <
[email protected]>.
HOME PAGE
gopher://sdf.org/1/users/sethsimon/e100pkt/ has the latest
version and links to technical documentation.
COPYRIGHT
Copyright (C) 2022, Seth Simon <
[email protected]>.
E100PKT comes with ABSOLUTELY NO WARRANTY. This is free software
covered by GNU GENERAL PUBLIC LICENSE 3, and you are welcome to
redistribute it under certain conditions. See
http://www.gnu.org
or COPYING file for details.